Le test SNIA S10-300 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test SNIA S10-300. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification SNIA S10-300, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification SNIA S10-300. Peut-être d'obtenir le Certificat SNIA S10-300 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Participer au test SNIA S10-300 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat SNIA S10-300 symbole bien la professionnalité d'un travailleur dans cette industrie.
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test SNIA S10-300 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Vous n'avez besoin que de faire les exercices à propos du test SNIA S10-300 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.
Code d'Examen: S10-300
Nom d'Examen: SNIA (Snia Storage Architect-Assessment,Planning and Design)
Questions et réponses: 85 Q&As
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
S10-300 Démo gratuit à télécharger: http://www.pass4test.fr/S10-300.html
NO.1 You have been tasked with identifying upgrade options for your networked storage. Which two should
you do? (Choose two.)
A. Only select hardware and software that is SMI-S compliant.
B. Share all received information openly with all vendors involved.
C. Understand needs and requirements as well capabilities of your existing technology.
D. Enlist legal advice or support of your purchasing department when creating RFI, RFP, and RFQs.
Answer: CD
SNIA certification S10-300 S10-300 certification S10-300 S10-300
NO.2 What is the primary objective of the storage capacity planning process?
A. To demonstrate the effects of changes in storage service levels.
B. To reach agreement with application representatives and management over the storage requirements.
C. To produce a capacity plan at agreed intervals which fits into the business planning cycle, e.g. the
financial year.
D. To calculate the effects on ILM service levels, array and fabric utilization of the estimated demand over
the period of the planning horizon.
Answer: C
certification SNIA S10-300 S10-300
NO.3 What are three key advantages of deploying a director-based solution over a mesh of switches?
(Choose three.)
A. lower cost
B. consistent latency
C. improved availability
D. increased hop count
E. ease of management
Answer: BCE
SNIA S10-300 examen S10-300 S10-300 examen S10-300 examen
NO.4 What is the goal of a SAN designed with no single point of failure?
A. to provide redundant paths to data
B. to have a good data backup system
C. to minimize unexpected loss of data access
D. to have clustered servers so that one is always available
Answer: C
SNIA S10-300 examen certification S10-300 S10-300
NO.5 When planning a NAS solution, which two sub-processes are associated with NAS Service Capacity
Management? (Choose two.)
A. Define future requirements.
B. Manage peak demand for NAS services.
C. Establish IOPS monitoring and exception thresholds.
D. Run reports on the storage and network utilization and IOPS of components.
Answer: BC
SNIA examen certification S10-300 S10-300 S10-300 examen certification S10-300
NO.6 A customer is using host based virtualization to mirror critical data between two vendors disk arrays.
Which two scenarios are true? (Choose two)
A. The host can use the same HBA to connect to both arrays
B. The customer can adhere to either vendors SAN design rules
C. The customer must adhere to both vendors SAN design rules
D. The host must use different HBAs with different firmware to connect to each array
Answer: CD
SNIA examen certification S10-300 S10-300 examen S10-300 S10-300 certification S10-300
NO.7 When implementing a high performance NAS solution you must check for which two items? (Choose
two.)
A. Ensure the network is full duplex.
B. Ensure that hosts have 100Mb NICs.
C. Ensure the network is at least 100Mb.
D. Ensure routers are configured for OSPF.
Answer: AC
SNIA S10-300 certification S10-300
NO.8 A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The customer wants a
solution designed which allows access from 32 servers with no single point of failure. Which number of
HBAs and the associated throughput, provide server access to the disk subsystem?
A. 16 HBAs, 75 MB/s
B. 32 HBAs, 90 MB/s
C. 64 HBAs, 25 MB/s
D. 64 HBAs, 50 MB/s
Answer: C
SNIA S10-300 examen S10-300 examen S10-300
NO.9 A customer has a terabyte database and is required to back up the data daily. The SLA has allotted 6
hours for completion of the backup from 7:00 P.M. until 1:00 A.M. However, the customer has a tape
library with only five SDLT tape devices running at native speeds of 40 GB/hour. Which two should you do
to successfully meet the expected SLA requirements? (Choose two.)
A. interleave data streams
B. enable server-based compression
C. use multiple data streams across multiple devices
D. prioritize the schedule to launch during periods of greatest inactivity
Answer: AC
SNIA certification S10-300 certification S10-300 certification S10-300 S10-300
NO.10 Your SAN currently has eight server ports and eight disk ports on one 16 port switch. Each server port
requires 80 MB/s of one-way bandwidth, spread out evenly among the storage devices. The customer
would like to add 28 server ports along with 28 disk ports. Each server will evenly distribute its traffic on
each disk. Using 16 port 1 Gb switches, which topology should you select to minimize the number of
switches and ISLs required?
A. star
B. full mesh
C. core-edge
D. point-to-point
Answer: C
SNIA S10-300 certification S10-300 S10-300 examen
Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test SNIA S10-300 à la première fois.
没有评论:
发表评论