Le programme de formation SAP C_TSCM42_64 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification SAP C-TSCM52-64. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test SAP C-TSCM52-64. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Le test simulation SAP C_TSCM42_64 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test SAP C_TSCM42_64 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
Code d'Examen: C_TSCM42_64
Nom d'Examen: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)
Questions et réponses: 80 Q&As
Code d'Examen: C-TSCM52-64
Nom d'Examen: SAP (SAP Certified Application Associate - Procurement with SAP ERP 6.0 EHP4)
Questions et réponses: 80 Q&As
Les produits de Pass4Test sont préparés pour le test Certification SAP C_TSCM42_64, y compris les formations et les informations ciblées au test SAP C_TSCM42_64. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Le test SAP C_TSCM42_64 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test SAP C_TSCM42_64 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification SAP C_TSCM42_64.
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test SAP C-TSCM52-64. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
C_TSCM42_64 Démo gratuit à télécharger: http://www.pass4test.fr/C_TSCM42_64.html
NO.1 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
certification SAP certification C_TSCM42_64 certification C_TSCM42_64 certification C_TSCM42_64 C_TSCM42_64
NO.2 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP examen certification C_TSCM42_64 C_TSCM42_64 examen C_TSCM42_64 examen C_TSCM42_64 examen
NO.3 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP certification C_TSCM42_64 certification C_TSCM42_64 certification C_TSCM42_64
NO.4 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP examen certification C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 examen
NO.5 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP examen C_TSCM42_64 examen C_TSCM42_64 examen certification C_TSCM42_64 certification C_TSCM42_64
NO.6 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
certification SAP C_TSCM42_64 examen certification C_TSCM42_64 certification C_TSCM42_64 certification C_TSCM42_64
NO.7 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP certification C_TSCM42_64 C_TSCM42_64 certification C_TSCM42_64 certification C_TSCM42_64
NO.8 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP examen C_TSCM42_64 examen certification C_TSCM42_64 C_TSCM42_64 examen certification C_TSCM42_64
没有评论:
发表评论