Les meilleures Isilon 200-045 examen pratique questions et réponses

Le test Isilon 200-045 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Isilon 200-045 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Isilon 200-045 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Vous pouvez tout d'abord télécharger le démo Isilon 200-045 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Code d'Examen: 200-045
Nom d'Examen: Isilon (Isilon Clustered Storage Professional Exam)
Questions et réponses: 70 Q&As

200-045 Démo gratuit à télécharger: http://www.pass4test.fr/200-045.html

NO.1 Which of the following best describes OneFS's NIC redundancy feature? (Choose 1)
A.NIC redundancy allows dynamic IP routing to occur between default gateways accessible via the
External-1 and External-2 networks.
B.NIC redundancy allows External-1 and External-2 to be aggregated into one logical link, so that either
NIC can fail without interrupting external network access.
C.NIC redundancy allows External-1 and External-2 to be utilized in an Active/Passive failover mode.
D.NIC redundancy allows clients to connect to the same file sharing protocols via either External-1 or
External-2.
Answer:B

Isilon   200-045 examen   200-045 examen   certification 200-045   200-045

NO.2 Which of the following statements about SmartConnect Advanced is NOT correct? (Choose 1)
A.SmartConnect supports CIFS failover
B.SmartConnect supports NFS failover
C.SmartConnect allows individual nodes to be included or excluded from zones
D.SmartConnect is based on standard DNS
Answer:A

Isilon examen   certification 200-045   200-045 examen   certification 200-045

NO.3 SyncIQ throttle limits can be applied on a per-replication policy basis. (True/False)
A.True
B.False
Answer:B

Isilon examen   200-045   certification 200-045   200-045 examen

NO.4 You have a three node cluster with SmartConnect configured. Which of the following is a correct
statement in regard to the SmartConnect virtual IP? (Choose 1)
A.The SmartConnect virtual IP is active on the highest-numbered node of the cluster. If that node fails, the
virtual IP will move to node 1.
B.The SmartConnect virtual IP is active on node 1. If node 1 fails, the virtual IP will move to node 2.
C.The SmartConnect virtual IP is active on all nodes of the cluster.
D.The SmartConnect virtual IP moves dynamically between nodes of the cluster based on node
performance.
Answer:B

Isilon examen   certification 200-045   200-045 examen   200-045 examen   200-045

NO.5 You have a three node cluster. The AutoBalance phase of the restriper is running. A disk drive fails.
Which of the following best describes the cluster's response to this failure? (Choose 1)
A.The AutoBalance phase of the restriper completes. Once AutoBalance is finished, the FlexProtect
phase of the restriper runs to repair data from the disk failure.
B.The AutoBalance phase of the restriper is cancelled. The Collect phase of the restriper runs to repair
data from the disk failure. After Collect completes, AutoBalance is start.
C.Since the AutoBalance phase of the restriper is already running, it will repair data from the disk failure.
D.The AutoBalance phase of the restriper is cancelled. The FlexProtect phase of the restriper runs to
repair data from the disk failure. After FlexProtect completes, AutoBalance is started
Answer:D

Isilon examen   certification 200-045   certification 200-045   200-045 examen

NO.6 You have a three node cluster configured with +1, and are preparing to add a fourth node. Which of the
following describes the impact of adding the fourth node in regard to file striping? (Choose 1)
A.Files were striped 2+1 with three nodes, and will now be striped 3+1 with four nodes.
B.Files were striped 2+1 with three nodes, and will now be striped 2+1 with four nodes.
C.There is no impact to file striping for existing data, but new data will be striped 3+1
D.Files were striped 2+1 with three nodes, and will now be striped 2+2 with four nodes.
Answer:A

Isilon examen   200-045 examen   200-045 examen   200-045

NO.7 The client workstations on your network are configured to use DNS server 10.10.10.1, which is
authoritative for the domain "isilon.com". You would like to configure SmartConnect with a zone named
"cluster.isilon.com". Your SmartConnect virtual IP is 10.10.10.100. Which of the following statements is
most accurate in regard to DNS and SmartConnect? (Choose 1)
A.The DNS server 10.10.10.1 must be configured with a delegation (NS) record delegating
"cluster.isilon.com" to the SmartConnect virtual IP 10.10.10.100.
B.The DNS server 10.10.10.1 must be configured with a host (A) record resolving "cluster.isilon.com" to
the SmartConnect virtual IP 10.10.10.100.
C.In order to utilize SmartConnect, the client workstations must be configured to use 10.10.10.100 as
their DNS server.
D.The SmartConnect service must be configured to use 10.10.10.1 as its DNS server
Answer:A

certification Isilon   200-045 examen   certification 200-045   200-045 examen

NO.8 Which of the following methods can be used to verify connectivity to a LDAP directory server? (Choose
1)
A.From the command line of a node, use the "ldapsearch" utility.
B.From the command line of a node, enter "isi ldap config". Pick menu option 3 "Check server
connectivity".
C.From the WebAdmin of a node, go to "File System" / "Directory Services" / "LDAP Services". Click
"Check server connectivity"
D.From the command line of a node, enter "isi_ldap_check".
Answer:A

Isilon examen   200-045 examen   certification 200-045   200-045 examen   certification 200-045

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Isilon 200-045. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Isilon 200-045.