La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Network Appliance NS0-530 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Network Appliance NS0-530, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Network Appliance NS0-530. Vous aurez une space plus grande à se développer.
Si vous voulez ne se soucier plus à passer le test Network Appliance NS0-530, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Network Appliance NS0-530. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Network Appliance NS0-530 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.
Code d'Examen: NS0-530
Nom d'Examen: Network Appliance (NCIE - DataFort Security Exam)
Questions et réponses: 118 Q&As
NS0-530 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-530.html
NO.1 California SB1386 requires businesses and government agencies to _____.
A. encrypt personal information on onsite backup tapes when reasonable alternative methods are not in
place
B. encrypt all personal information on offsite backup tapes when reasonable alternative methods are not
in place
C. encrypt all personal information on both disk and backup tapes, onsite or offsite, when reasonable
alternative methods are not in place
D. notify individuals if their unencrypted personal information is believed to have been disclosed to an
unauthorized person
E. notify the California District Attorney Office if unencrypted personal information is believed to have
been disclosed to an unauthorized person
Answer: D
Network Appliance examen NS0-530 NS0-530 certification NS0-530
NO.2 Which two key policies allow for all keys to be pre-generated and replicated to the DR site? (Choose
two.)
A. key per tape
B. key per pool
C. Global Pool with single key
D. periodic disk rekey
Answer: BC
Network Appliance examen NS0-530 examen certification NS0-530 NS0-530 NS0-530
NO.3 Which two statements about disk and tape I/O are true? (Choose two.)
A. Disk and tape I/O can be combined through the same standalone DataFort.
B. Disk and tape I/O can be combined through the same cluster but not through the same DataFort.
C. Disk and tape I/O cannot be combined through the same standalone DataFort.
D. Disk and tape I/O cannot be combined through the same cluster.
Answer: CD
Network Appliance examen NS0-530 NS0-530 examen certification NS0-530 NS0-530 examen certification NS0-530
NO.4 If you have an 8-node cluster, how many members must be online in the cluster in order to create
Cryptainer vaults?
A. 1
B. 4
C. 5
D. 8
Answer: C
certification Network Appliance NS0-530 NS0-530 certification NS0-530
NO.5 What are three valid forced media type and duplex mode settings on the DataFort? (Choose three.)
A. 1000baseTX, full-duplex
B. 1000baseTX, half-duplex
C. 100baseTX, full-duplex
D. 100baseTX, half-duplex
E. 10baseTX, half-duplex
Answer: ACD
Network Appliance examen certification NS0-530 certification NS0-530
NO.6 Which two statements are true about signed DataFort log messages? (Choose two.)
A. They contain a verifiable digital signature.
B. They can only be authenticated on the DataFort that generated the log message.
C. They may not be sent to a syslog server.
D. They may not be sent to a Windows event log.
Answer:AB
Network Appliance NS0-530 NS0-530 NS0-530 NS0-530
NO.7 Which procedure is used to move keys between LKM servers or appliances that do not share network
connectivity?
A. clustering
B. key export and import
C. Key Translation
D. tape metadata
Answer: B
Network Appliance examen NS0-530 examen NS0-530 NS0-530 examen
NO.8 How many additional FC-switch ports are required for an inline direct-attached FC-5XX DataFort?
A. 0
B. 1
C. 2
D. 4
E. 10
Answer:A
certification Network Appliance certification NS0-530 NS0-530 examen NS0-530 examen
NO.9 Which property must be set to prevent overlapped SCSI commands?
A. dfc.serialize_storage_cmds
B. dfc.disable_overlapped_cmds
C. dfc.disable_host_LIP
D. dfc.isp.enableTaskMgmtPassUp
Answer:A
certification Network Appliance NS0-530 NS0-530 NS0-530 examen NS0-530 examen
NO.10 In 2.x firmware, how many virtual storage devices (targets) and virtual client hosts (initiators) can be
attached to a single FC525 model DataFort?
A. 1 virtual storage device and 8 virtual client hosts
B. 7 virtual storage device and 7 virtual client hosts
C. 8 virtual storage device and 8 virtual client hosts
D. 8 virtual storage device and 32 virtual client hosts
E. 16 virtual storage device and 128 virtual client hosts
Answer: B
Network Appliance NS0-530 examen certification NS0-530 NS0-530 certification NS0-530
NO.11 In SAN 2.x, how many targets can be virtualized on an FC520?
A. 1
B. 7
C. 8
D. 31
Answer: B
certification Network Appliance NS0-530 certification NS0-530 NS0-530 NS0-530
NO.12 Which is a correct System Card replacement procedure for SAN 2.x?
A. zeroize DataFort and restore with an initialized System Card and a recent configdb using a quorum of
Recovery Cards
B. zeroize DataFort and join an existing cluster with an uninitialized System Card and a quorum of
Recovery Cards
C. insert an uninitialized System Card into the DataFort and perform a System Card replacement using a
quorum of Recovery Cards
D. insert an initialized System Card from an existing cluster member and perform a System Card
replacement using a quorum of Recovery Cards
Answer: B
certification Network Appliance certification NS0-530 NS0-530 certification NS0-530 NS0-530 NS0-530
NO.13 What can the E-Series DataFort net util tcpdump command capture?
A. network packets going between two arbitrary machines
B. only network packets going between DataFort client-side NIC and arbitrary machines
C. only network packets going between DataFort server-side NIC and arbitrary machines
D. only network packets going between DataFort client-side NIC and server-side NIC
E. network packets going between DataFort client-side/server-side NIC and arbitrary machines
Answer: E
Network Appliance examen NS0-530 NS0-530 examen
NO.14 Which two statements are true if a System Card is removed in a functional, fully initialized DataFort?
(Choose two.)
A. Encryption services are disabled after a reboot.
B. Encryption services halt within five minutes of card removal.
C. Recovery Card replacement does not work.
D. DataFort sends SNMP trap and initiates shutdown to protect access to encrypted data.
Answer:AC
certification Network Appliance NS0-530 examen NS0-530 examen NS0-530
NO.15 If a DataFort 2.x or later appliance fails, which three information sources can be used with the DataFort
Wizard to recreate the configuration information on a replacement? (Choose three.)
A. *.xdf file from LKM software/appliance
B. mysqldump of DataFort configDB
C. *.xdf file from manual backup
D. *.lkm file from LKM software/appliance
E. surviving cluster member
Answer:ACE
Network Appliance certification NS0-530 NS0-530 examen certification NS0-530 NS0-530 NS0-530 examen
NO.16 During installation of the LKM server software, which configuration options can be specified?
A. database type and schema
B. target directory and license
C. server port number and "using SSL"
D. LKM server IP and hostname
Answer: B
certification Network Appliance NS0-530 NS0-530 examen NS0-530 examen
NO.17 Which two can authorize Key Translation? (Choose two.)
A. the source DataFort administrator
B. the destination DataFort administrator
C. the LKM administrator
D. a quorum of Recovery Cards and passwords
E. a Recovery Key Archive file
Answer: DE
Network Appliance NS0-530 certification NS0-530 certification NS0-530 NS0-530 examen
NO.18 Which three factors should be considered when assessing the performance impact a DataFort will
have on an existing environment? (Choose three.)
A. the number of devices connected to a specific DataFort
B. the type of Cryptainer vault created (LUN Mapped versus Port Mapped)
C. the combined speed of all devices connected to the DataFort
D. the device type, tape or disk, being connected to the DataFort
Answer: ACD
certification Network Appliance certification NS0-530 NS0-530
NO.19 What is the purpose of the Key Policy setting for tapes?
A. It determines whether or not each tape has a unique key.
B. It determines whether or not tape encryption keys can be shared by DataFort appliances.
C. It determines whether or not tape encryption keys are written to tape.
D. It determines how frequently tape keys are backed up.
Answer:A
Network Appliance examen NS0-530 examen NS0-530 NS0-530 NS0-530
NO.20 When are Recovery Cards required in the trustee key-sharing process?
A. during the establishment of only the trustee relationship
B. during the establishment of the trustee relationship and the key export
C. during the establishment of the trustee relationship, key export, and key import
D. Recovery Cards are not required in the trustee key-sharing process.
Answer:A
certification Network Appliance NS0-530 NS0-530
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Network Appliance NS0-530. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
没有评论:
发表评论